DAP 1522 Rev B - Power Light is Red

[duffany1]

Yesterday we attempted to wire up the DAP 1522 Rev B. We hooked it up exactly how it says to in WPI's website. The problem is that when we power on the robot, the "power" light on the wireless bridge is blue for about a quarter of a second, then immediately turns red, and the radio does not function. We tested the voltage output to the radio and it seems to be about 4.9 - 5.3 volts.

Any ideas as to what the problem could be?

Might it be that we have a defective radio? If so, can we use an old radio for now? How do you deal with a defective product being in the KoP?