|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Setting up the D-Link radio?
I installed the FRC Bridge Configuration Utility program, but whenever I try and configure it, I'm told to reset. I reset it multiple times but get the same error every time
Set the team number and a custom WPA Key, Radio: "DAP1522 RevB" and Mode: "2.4GHz Access Point". The mode on the D-Link itself (by the power plug and reset button) is also set to AP 2.5 GHz, the power is plugged in all the way, and the ethernet cable is attached between my laptop and the D-Link router. The error says: Quote:
|
|
#2
|
||||||
|
||||||
|
Re: Setting up the D-Link radio?
When did you download the radio utility? A new version was uploaded yesterday to fix the illegal firmware issue. See http://wpilib.screenstepslive.com/s/...software-notes
|
|
#3
|
||||
|
||||
|
Re: Setting up the D-Link radio?
Quote:
|
|
#4
|
||||
|
||||
|
Re: Setting up the D-Link radio?
http://www.usfirst.org/roboticsprogr...ical-Resources has the download links, and when they're updated, they'll say so.
On a second note, since the Configuration Utility works with the 2.02 version of the firmware, if we already downgraded to 2.0, should we re-install the 2.02 version? |
|
#5
|
||||
|
||||
|
The following thread fixed this problem for us today:
http://www.chiefdelphi.com/forums/sh...d.php?t=110459 |
|
#6
|
||||
|
||||
|
Re: Setting up the D-Link radio?
Quote:
![]() |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|