|
|
|
 "The secret to success is to acknowledge that you have limits, but to never acknowledge that you have reached those limits." - lady_raidan [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| "The secret to success is to acknowledge that you have limits, but to never acknowledge that you have reached those limits." - lady_raidan [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
R32 and the use of Electrical solenoid actuators
R32
....Electrical solenoid actuators, no greater than 1 in. stroke and rated electrical input power no greater than 10 watts (W) continuous duty at 12 volts (VDC)... Didn't have a need last year, and can't seem to find any posts discussing it, so does this mean I can stop retrofitting FP motors into (older, like from the 1990's GM trucks) standard GM door lock actuators?, or other power door lock actuators for that matter They seem to fit the criteria, less than an inch stroke, 10w (probably)? I'm sure a Delphi would have real details. Or am I just wishing here. 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode