|
|
|
 the golden rule of robotics for the 21st century: Do unto robots as you would have them do unto you - KenWittlief [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| the golden rule of robotics for the 21st century: Do unto robots as you would have them do unto you - KenWittlief [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#8
15-01-2013, 14:46
|
||||
|
||||
|
Re: Weird Crio/Programming problem
It sounds to me like perhaps the robot is not responding to or is dropping Driver Station Packets.
Do you have many time delays in your teleop vi (I'm assuming you're using LabVIEW)? If so then you may need to move some of your driving code to one of the periodic task vi instead. Good communications with the Driver Station requires that the teleop.vi gets called as often as possible. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode