|
|
|
 I would suggest spending a few more hours digesting the manual before you finalize your designs. You seem to have missed a few key rules. - GaryVoshol [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| I would suggest spending a few more hours digesting the manual before you finalize your designs. You seem to have missed a few key rules. - GaryVoshol [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Loss of connection
Hi guys,
Our driverstation is having some weird communication issues. I can connect to the camera plugged into the router, through 10.8.35.11, but I can't sync code to the robot and the dashboard lights are red for communications. I just reimaged the driverstation, thinking it would solve the problem, but it didn't. It used to work but then it just stopped. Any ideas? and could it be hardware, not software? 
|
|
#2
16-01-2013, 07:40
|
|||
|
|||
|
Re: Loss of connection
Use the imaging tool to view the IP address and image version of the cRIO. It sounds like you need to reformat it.
Greg McKaskle
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
