|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||||
|
|||||
|
Kit of Parts Problems
Last night, our team met and we went through the kit of parts and looked at everything.
We've run into a problem, I think. We are missing a good amount of the parts that were supposed to be included in the kit. I also realize that we are supposed to be receiving parts via mail in the near future, so I wanted to just list everything we're missing and bounce it off you all - so I know what to call FIRST about and what to wait for in the mail. So, we are missing - Control System Plastic Shield for 25 pin connector (Not too important, I know) Quick-Disconnect Power Connector 10' #6 AWG Wire, Red Fasteners Helical Plastic Wire Wrap (1/4" diameter) Helical Plastic Wire Wrap (1/2" diameter) Motors and Pumps Van Door Motor - Bosch Instead, it seems we received 2 of Chiaphua motors and 2 of their matching gears. I need verification that we are not supposed to have two of these. We also received an orange 'torque motor,' but we're not sure of the manufacturer, and we can't find it on the list of kit parts. What is this, and are we supposed to have it? Pulleys The entire bag, containing: Bushing (for CMT Pulleys) (4) Alum. timing pulley - 20 tooth Plastic timing pulley - 30 tooth Plastic timing pulley - 60 tooth Springs Constant Force Spring, Small - we only received 1 Wheels 6" diameter wheelchair wheel As you can see, we're missing quite a bit. I didn't include the revolving light, since I know that's supposed to be shipped. What else should I expect, and what am I missing entirely!?!? |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Rules on making spare parts fyi | DougHogg | General Forum | 0 | 02-04-2003 16:18 |
| Virtual Parts Kit | TheSwazz | 3D Animation and Competition | 1 | 27-01-2003 20:12 |
| My Digital 'Kit of Parts' For My Friends | archiver | 2000 | 7 | 23-06-2002 22:33 |
| Inventor drawings of parts from kit | patrickrd | Inventor | 1 | 11-01-2002 14:16 |
| Inventor and Virtual Kit of Parts | Torchin | Inventor | 1 | 09-01-2002 09:59 |