Unable to assign board ID's

[ekovacs]

Hi,

I got it working, I discovered that the robot needs to be power cycled to get the jaguars to accept their new ID's. Thanks for all the suggestions.

[Levansic]

That doesn't sound right. ID changes are instantaneous. The Jaguar should pulse its LED for the same count as its ID, immediately after you press the recessed button with a straightened paper clip.

There is a short time period while the LED flashes green, for this button to be hit. We usually have two people setting the ID's, so we aren't fumbling for the button while the window closes. The button pusher counts the amber pulses to verify the setting.