Camera Problems

[lorem3k]

Yes, you need to either plug in the wall plug or the 5V power on the PD board (depending on whether or not you've made the cable already).

[Brandon_L]

Originally Posted by lorem3k

Yes, you need to either plug in the wall plug or the 5V power on the PD board (depending on whether or not you've made the cable already).

There should be a cable that came with the camera that lets you plug it into a wall outlet. You can set up the camera using a wall outlet. To use it on your robot, snip the cable close to ac/dc adapter (black box that plugs into the wall) and wire it to the +5v output of the power distribution board.

Once you get lights to blink, you can read through this to get it configured

[cdizzle]

Unfortunately, it seems like we've misplaced the plug in power source because this camera is a few years old and this is the first time we've ever used it. Does anyone know if we can order a new plug in power source?

[Alan Anderson]

Originally Posted by cdizzle

Unfortunately, it seems like we've misplaced the plug in power source because this camera is a few years old and this is the first time we've ever used it. Does anyone know if we can order a new plug in power source?

The camera uses a Size H power plug. Wire it to the 5 volt output from the Power Distribution Board, positive to the center and negative to the barrel.

[cdizzle]

Thank you so much for your help!