cRIO connection issue-can't deploy code

[Mark McLeod]

Things to try, some of them already mentioned:

• Disable all other Network connections leaving only the one you are using for the cRIO.
• Turn off all firewalls and anti-virus programs
• Verify the remaining connection has an FRC valid IP address, i.e., 10.13.7.5 (for Ethernet) or 10.13.7.9 (for wireless), Check the Advanced button for multiple IP addresses and delete any extras.
• Start the Driver Station to see the Diagnostic tab ping verifications
• Try connecting your laptop directly to the cRIO vis Ethernet cable
• Type ipconfig /all in a command window to verify what your network connections are.
• Close the Dashboard if it is open and reboot the cRIO. There is currently an issue if the Dashboard is trading data with an existing program on the cRIO.