Picking up frisbees

[kingbrandon14]

Originally Posted by falconmaster

here is an example
http://www.youtube.com/watch?v=-F0bVrUb2hA

-this is an interesting design, but can it hold more than 1 frisbee at a time?

Also, our robot should be able to pick up frisbees quite well, using both belts and pneumatics

[F22Rapture]

Originally Posted by kingbrandon14

-this is an interesting design, but can it hold more than 1 frisbee at a time?

It looks like they might be extending the hopper on the bottom out a bit more than the prototype shows. Which would allow you to shoot it and feed it by aiming the mechanism vertically. Imagine the Ri3D robot, except with the hopper on the bottom.

I could be wrong, but that seems reasonable.

[Siri]

Originally Posted by pfreivald

It seems to me that picking them up is the easy part. Manipulating them within the confines of the robot is much harder!

Within the robot? Who told you you had to do that?

Our current plan is to allow for the simple (err, "simple") addition of floor loading during Unbag for second districts, but not worry about it until everything else is in order. That said, geometry is misbehaving a little...

[Anupam Goli]

picking up frisbees isn't that hard. you just have a simple roller out infront of some polycarb and you can pick it up. Manipulating the frisbees to go into the shooter is a whole different story.

The geometry of this entire system and having it fit within that 54" cylinder has has given me sleepless nights and nightmares this season! We're playing 3 ideas at the moment, and hopefully the prototypes can show us something that I'm not seeing about what we can do. We've already been under the assumption that having the intake integrated with the shooter would take the longest, but if this isn't fleshed out by week 3, we're going to be in trouble.

[pfreivald]

Originally Posted by Siri

Within the robot? Who told you you had to do that?

Nobody... I didn't even say that's what we're doing!

But weight considerations and the fact that frisbees go under bumpers quite easily makes it a strong consideration.

Originally Posted by Siri

Our current plan is to allow for the simple (err, "simple") addition of floor loading during Unbag for second districts, but not worry about it until everything else is in order. That said, geometry is misbehaving a little...

Geometry and the fact that Frisbees are just so... Frisbeeish.

[falconmaster]

Originally Posted by kingbrandon14

-this is an interesting design, but can it hold more than 1 frisbee at a time?

Also, our robot should be able to pick up frisbees quite well, using both belts and pneumatics

It can hold four
https://sites.google.com/site/falcon...testing-videos

[JesseK]

Excluding internal disc manipulation:

Picking up 1 disc at a time: easily doable on any robot design

Picking up 2 discs side-by side: much harder due to constraints and lower room for error. But why would anyone want to do that?

[pfreivald]

Originally Posted by JesseK

But why would anyone want to do that?

Uberautonomousiosity?

[Bruceb]

What are you doing about upside down frisbees?

[Squeakypig]

Originally Posted by JesseK

Excluding internal disc manipulation:

Picking up 1 disc at a time: easily doable on any robot design

Picking up 2 discs side-by side: much harder due to constraints and lower room for error. But why would anyone want to do that?

In auton the frisbees that are "free game" are line up side by side, why not pick up both at once? 7 frisbee auton in top goal = 42 points. Add in a 10 point climb and you just beat the teams that score 4 alliance disks in tower goal and climb high...and there is still teleop scoring to be had! Auton is key, like most years, and because of that, a frisbee pick-up mechanism should be strongly considered.

[JesseK]

Originally Posted by Squeakypig

In auton the frisbees that are "free game" are line up side by side, why not pick up both at once? 7 frisbee auton in top goal = 42 points. Add in a 10 point climb and you just beat the teams that score 4 alliance disks in tower goal and climb high...and there is still teleop scoring to be had! Auton is key, like most years, and because of that, a frisbee pick-up mechanism should be strongly considered.

Was being facetious. Of course I knew that, as has been teased around these forums over the last few days. The amount of people who write sensationalist claims about not needing any floor pickup is ridiculous. Even a single-disc floor loader is very valuable in autonomous since it can get a total of 5 autonomous discs.

[Chris is me]

Originally Posted by JesseK

The amount of people who write sensationalist claims about not needing floor pickup is ridiculous.

Robots without floor pickup will win events as captains or first round picks this year. I absolutely guarantee it.

[JesseK]

Originally Posted by Chris is me

Robots without floor pickup will win events as captains or first round picks this year. I absolutely guarantee it.

Probably. There are 50-something events. I'll bet you a team t-shirt that there are more alliance captains with floor pickup than without.

[MrForbes]

Originally Posted by JesseK

Probably. There are 50-something events. I'll bet you a team t-shirt that there are more alliance captains with floor pickup than without.

My guess is that at one of our regionals, we will probably see about half the alliance captains with floor pickup, and the other will have one or two.

[Anupam Goli]

Originally Posted by Squeakypig

In auton the frisbees that are "free game" are line up side by side, why not pick up both at once? 7 frisbee auton in top goal = 42 points. Add in a 10 point climb and you just beat the teams that score 4 alliance disks in tower goal and climb high...and there is still teleop scoring to be had! Auton is key, like most years, and because of that, a frisbee pick-up mechanism should be strongly considered.

Oh man, you read my mind. Floor pickup is going to be essential for those teams that go beyond just 3 disc autonomous. It's going to be like a 6+ ball auton that we say last year.