BRONY THREAD

[Keyreaper]

Originally Posted by rl1806

How did you get your robot to be that agile?

Also what is everyone planning on doing with two cameras?

The robot uses the KOP belts system modified to work with CIM-PLE Boxes. It's running on concrete so its slightly more slick than it should be and it's able to turn easier that way, but we'll see how it does on capret with full weight.

Two cameras bring about multiple advantages esp if you can't see all the way down the field and you have a frisbee you need to pick up, to vision tracking on the targets on the goals. If I am able to get two working, I would have one possibly in a position that would help me align the robot for climing.

Originally Posted by DevinW

Okay guys, I think I can use a hand from the multitude of you offering. To add a second camera, would I need to just copy pasta the camera items in Begin.vi and Vision Processing.vi? If that's correct, how do I edit the dash to show the second camera? I'm a bit stuck right now, and the teams programming mentor isn't in at the moment. I'll probably be able to ask him soon, but even he seemed a bit unsure of how to have multiple cameras, and he was our programmer for the past four years. Thanks in advance to anyone who can help!

Also! Episode tomorrow! DISCORD!

I don't know exactly how to do this, so I may not be of much help here, and I'm sure there are more out there with more experince than me in vision tracking and LabView, but I'll try to do something similar to this tonight (possibly play around with driver station to fit my needs i.e.- another tab for camera viewing, or two windows for the cameras) and report back to you if I get something working. I'm sure plenty of reading and searching is ahead of me tonight :3.

Also Discord/Shy Shipping All Around after this Ep.? XD