Help Needed for Network

[Alan Anderson]

If you really want to have a laptop-connected router in the mix, you can do it. Set the D-Link to "bridge" mode and configure it to connect to the router's SSID.

Why do you want to do that? Does your laptop not have wireless networking capability?

[andreboos]

To clarify Alan's post, the typical setup is "robot <--> DAP-1522 <~~> laptop". Unless your laptop lacks wireless capabilities, this would be the easiest way to program and operate your robot from a laptop.

[propionate]

Originally Posted by Alan Anderson

If you really want to have a laptop-connected router in the mix, you can do it. Set the D-Link to "bridge" mode and configure it to connect to the router's SSID.

Why do you want to do that? Does your laptop not have wireless networking capability?

To clarify Alan's post, the typical setup is "robot <--> DAP-1522 <~~> laptop". Unless your laptop lacks wireless capabilities, this would be the easiest way to program and operate your robot from a laptop.

Our team has always used a router. It expands the range of the wireless at least two-fold, making it much easier to operate the robot at community events or during driver's practice. I would also be interested in an answer to 1605's question. We had no problems connecting using the Robot<->DLink<~>Router<->DS setup before the 2013 driver's station, but now we cannot connect at all. Haven't done much troubleshooting yet though, will update tomorrow after I figure it out.

[Mark McLeod]

Here are some hookup variations: Robot IP Network Variations