Is there a way to have multiple wireless IPv4 or not have the router to require one?

[Alan Anderson]

Originally Posted by Chiller

You could format your crio to have the ip like 192.168.1.1 and then your wireless bridge to 192.168.1.2 so you wouldnt have to change your ip.

The cRIO imaging utility can only set the IP address based on team number, in the 10.te.am.2 format. I'm sure you could manage to use MAX to change that, but you'd have a bear of a time finding anyone who would be willing to support you if you did.

Your best bet is to activate DHCP on the D-Link and have it give out addresses in the appropriate range.

And please don't set multiple IP addresses on an adapter. Some of the FRC tools don't handle that well at all.

[DjScribbles]

In my experience, a netsh script, such as the one from Seth, requires you to run it as administrator on Vista/7. The DHCP approach would be the simplest, just be sure to setup an ip reservation for the CRIO and the camera if you have one.

[Lightfoot26]

Originally Posted by DjScribbles

In my experience, a netsh script, such as the one from Seth, requires you to run it as administrator on Vista/7. The DHCP approach would be the simplest, just be sure to setup an ip reservation for the CRIO and the camera if you have one.

Just be sure to switch back come competition season!