Full Court shot

[DonRotolo]

Nice video. That looks awesome. I assume you know there might be a pyramid on the field, so that's why you programmed in that little curve at the end....

[Jay O'Donnell]

Very impressive! Was it a one in a million type shot, or something more repeatable? Either way it looks really cool!

[bfk]

Originally Posted by Jay Money 1058

Very impressive! Was it a one in a million type shot, or something more repeatable? Either way it looks really cool!

It was about a one in five shot. With quite a bit of variance in the trajectory. Once the Frisbee goes past its vertical peak it becomes incredibly sensitive to even tiny variations from horizontal at launch. Well at least ours do.

We spent some more time balancing the wheel today and got it a bit straighter, but we're more concerned with shorter shots, that one was just too neat not to post.

Those wheels and the hubs have enough play to rattle anything apart. In today's tests one of the students said "It's much smoother, the floor isn't vibrating enough to make my legs numb."

[vinnie]

Hello bfk,

What motor are you using to drive the pneumatic wheel? The results look great!

[JesseK]

Originally Posted by vinnie

Hello bfk,

What motor are you using to drive the pneumatic wheel? The results look great!

Answer is found in the Youtube Description:

Originally Posted by Youtube Video

Prototype shooter sinking the Frisbee at 57 feet. Single CIM running at about 90% power with AndyMark pneumatic wheel.

[vinnie]

Hello bfk,

What motor are you using to drive the pneumatic wheel? The results look great!

[neshera]

I fear I'm opening up a can o' worms here, but does anyone think the long shots, i.e. from more than half court or so, will be affected by air currents/movement much? The shorter shots seem to not rely much on the disc floating. Is there much air movement inside a typical arena?

[bfk]

Originally Posted by neshera

I fear I'm opening up a can o' worms here, but does anyone think the long shots, i.e. from more than half court or so, will be affected by air currents/movement much? The shorter shots seem to not rely much on the disc floating. Is there much air movement inside a typical arena?

I suspect that will be very venue dependent, unless they crank the bass way up on the PA, just to even things out between venues. Oops, maybe I shouldn't have said that.

[Jay O'Donnell]

Originally Posted by bfk

We spent some more time balancing the wheel today and got it a bit straighter, but we're more concerned with shorter shots, that one was just too neat not to post.

Those wheels and the hubs have enough play to rattle anything apart. In today's tests one of the students said "It's much smoother, the floor isn't vibrating enough to make my legs numb."

We had that same problem, which was causing some variance in our shot accuracy. We might've had a chance of making some shots like you're own, but they would've been very rare. Very impressed by your work!

[neaanopri]

Out of curiosity, what gear ratio were you using?

[dtengineering]

Before I go all "safety mode", let me just point out that is a very cool shot and I'm pretty impressed. Okay... now its time for the tech inspector in me to express a concern...

I know this is just a prototype, and that you're probably already planning a safety shield for this shooter, but I think teams should be aware that not only are these wheels not designed to spin at high RPM, but that they store a significant amount of finger-ripping energy when they do.

It is much easier to build safety shields in to your design than to add them as part of tech inspection!

Thanks,

Jason

[bfk]

Originally Posted by dtengineering

Before I go all "safety mode", let me just point out that is a very cool shot and I'm pretty impressed. Okay... now its time for the tech inspector in me to express a concern...

I know this is just a prototype, and that you're probably already planning a safety shield for this shooter, but I think teams should be aware that not only are these wheels not designed to spin at high RPM, but that they store a significant amount of finger-ripping energy when they do.

It is much easier to build safety shields in to your design than to add them as part of tech inspection!

Thanks,

Jason

Definitely a design consideration. I personally need all the limbs and eyeballs I currently have, and I assume other feel the same way.

[Orion.DeYoe]

Originally Posted by dtengineering

Before I go all "safety mode", let me just point out that is a very cool shot and I'm pretty impressed. Okay... now its time for the tech inspector in me to express a concern...

I know this is just a prototype, and that you're probably already planning a safety shield for this shooter, but I think teams should be aware that not only are these wheels not designed to spin at high RPM, but that they store a significant amount of finger-ripping energy when they do.

It is much easier to build safety shields in to your design than to add them as part of tech inspection!

Thanks,

Jason

This is definitely a valid point. One our team has considered as well. We are not using the AM Pneumatic Wheel but we attached "Shrapnel Guards" as far around our wheels as we could, so if the wheels wear out and fragment they won't fly out and hit anyone.

[tickspe15]

Don't have a video yet but we were shooting above 90 percent into the 2 point goal from the feeder station. And able to get one load of 4 Frisbees every 10 to 15 seconds

[Brandon_L]

That looks like the AM Pneumatic wheel. Were also using that, but it wobbles insanely. How did you manage to fix that? Yours looks pretty stable.