|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: pic: FRC 3184's drop test results 2
It used the Press Fit Framing system from McMaster
Tubes are P/N 47045T48 Connectors are P/N 47045T81 - 47045T86 |
|
#2
|
|||||
|
|||||
|
Re: pic: FRC 3184's drop test results 2
Another reason our team didn't choose to climb to 30. The sacrifice of the frame was worth it to prove the damage.
Go Orange Alliance! |
|
#3
|
||||
|
||||
|
Re: pic: FRC 3184's drop test results 2
I would be interested to see results with a bolted/rivited/welded/sheetmetal frame. As most teams won't be using the system you mentioned, these tests are of limited utility to the community.
Like everyone else said, don't fall. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|