Java Deployment Issues

[LK Peter]

Originally Posted by Team3266Spencer

Your subnet mask should be set to 255.255.255.0

You should also make sure that the IP you've set for the adapter is 10.x.y.(Make this something between 5 and 9 or so). You may have to adjust the last number.

Your default gateway should be 10.x.y.2 or whatever IP the cRIO is on.
I agree that you should never have both the wireless and local connection enabled at the same time. Although it has worked for me in the past.

If all else fails always reboot the cRIO and your computer.

The problem looks like it could be with NetBeans too. In which case things can only get more painful.

Good Luck, this probably won't help much but I hope it all works out in the end.

Thank you this was very helpful for our team 3871