|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#16
|
|||||
|
|||||
|
Re: 3 Fried Side Cars
A,
If you take a sharp utility knife you can cut the ribbon cable flush with the IDC connector. Once you cut it, you have to check that no adjacent conductors are exposed or touching other wires in the ribbon. A sharp blade will usually give you no problem. After that, no insulation is needed. |
|
#17
|
|||
|
|||
|
We'll definitely do that for our next ribbon cable.
Thanks. ![]() |
|
#18
|
|||
|
|||
|
Re: 3 Fried Side Cars
Quote:
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|