|
Re: pic: 2013 Practice and Competition Chassis
I might be mistaken, but if those are 1" hole spacings in the chassis, I think that frame might have a frame perimeter that is well over the 112" allowed this year.
(112" perimeter is 28"x28", and that robot appears to look bigger than that, but maybe it's shorter front-to-back than I think it is...)
PS: I'm not trying to cause trouble, but rather hoping to help avoid problems if you have a robot frame that's too big.
PPS: Reminds me of our 2007 season when my wife was measuring the robot for final bumper assembly 20 hours before ship and asked us all why the robot was 1.5" wider than allowed -- we all said that we designed the robot a half-inch undersized and that she must have measured wrong! 5 minutes later we were trying to figure out how we would be able to take 2" out of the middle of the robot!
__________________
Ken Streeter - Team 1519 - Mechanical Mayhem (Milford Area Youth Homeschoolers Enriching Minds)
2015 NE District Winners with 195 & 2067, 125 & 1786, 230 & 4908, and 95 & 1307
2013 World Finalists & Archimedes Division Winners with 33 & 469
2013 & 2012 North Carolina Regional Winners with teams 435 & 4828 and 1311 & 2642
2011, 2010, 2006 Granite State Regional Winners with teams 175 & 176, 1073 & 1058, and 1276 & 133
Team 1519 Video Gallery - including Chairman's Video, and the infamous "Speed Racer!"
|
There are so much more things to be worked on and are more beneficial to FIRST and FIRSTers than green dots by someone's name. - tiffany34990 [more] 
26-01-2013, 21:15
Threaded Mode