Andy Mark Worm Box wanted in North central Florida or Georgia

[LeelandS]

If you can't find a team to loan you a WormBox in a reasonable time, you could consider this (we did earlier in the season).

AndyMark has almost all of the individual hardware pieces for the WormBox in stock (i.e. Side plates, spacers, and even the worm and worm gears themselves). The only piece currently listed as out-of-stock is the output shaft. You could try ordering each individual part and then making up your own output shaft using the CAD information AndyMark posts on their website. The AM WormBox page should list all of the necessary components and hardware you need.

I hope this helps you along.

Regards,
Leeland

[Team 4118]

A big Thank You to Chris Fultz Cyber Blue - Team 234 from Indianapolis. He offered to mail one to me. We hope to see you on top of the pyramid.

Thanks
John Youmans
Team 4118 Roaring Riptide

[billbo911]

Originally Posted by LeelandS

If you can't find a team to loan you a WormBox in a reasonable time, you could consider this (we did earlier in the season).

AndyMark has almost all of the individual hardware pieces for the WormBox in stock (i.e. Side plates, spacers, and even the worm and worm gears themselves). The only piece currently listed as out-of-stock is the output shaft. You could try ordering each individual part and then making up your own output shaft using the CAD information AndyMark posts on their website. The AM WormBox page should list all of the necessary components and hardware you need.

I hope this helps you along.

Regards,
Leeland

AndyMark has posted the layout drawing for the output shaft. If you have access a lathe and a mill, it would be easy to replicate it.

[fox46]

WormBoxes just came back in stock - just got the email.