Inventor tutorials

[matthewgkerr]

Hi all,

I would like to know if I am looking at the right tutorial material for Inventor. I have been going through the Built By Design videos and I'm starting to wonder if these are a few years old and if anyone is finding them useful. They are certainly a good starting point, but i'm finding them to be very brief and sometimes difficult to follow i.e. the music in the Content Center video drowns out the speaker. Of then the video skips over steps to speed up the video, but it is those steps that I really want to see...

What I would like to find is something similar to the Solidworks tutorials. They are text based, step by step instructions. And each step has a link which highlights in the tool which button is being used.

What would be even better is some instructions on how to build the supplied Andy Mark drive kit. I'm confident that if I could get through something like that, then I would be able to continue with the rest of my robot. I have done some tutorials on creating parts, but what would be more useful is knowing how to find and use the pre-made FRC parts.

I did see the email from US First which left me thinking that Phil Dollan's blog will go over assembly of the kit of parts, but i'm yet to see anything.

Also, there is a link on the Autodesk student resource page (Phil Dollan’s Blog and Webinar Series) which is broken... i assume the link should be this: http://firstautodesk.wordpress.com/

While i'm here the first video in Built By Design shows the Sketchbook tool. I tried to find this but it looks like the tool is no longer available. There does seem to be a similar tool on tablet tho... is there an updated video which covers early sketches as part of the design process?

Any suggestions of thoughts would be appreciated.
Also just some suggestions;
1. please update your videos
2. please create FRC relevent vidoes
3. please fix the links on the autodesk website
4. please let me know when Phil will be updating his blog

Thanks for your support,
Matt.