|
|
|
 Until we learn to celebrate our differences with great vigor in an earnest way, we won't accomplish what we're supposed to get done. - Rich Kressly [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| Until we learn to celebrate our differences with great vigor in an earnest way, we won't accomplish what we're supposed to get done. - Rich Kressly [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Jaguar "can't contact boot loader"
We got our shipment of the new black jags with the FRC logo and 3 out of 10 were bricked, can't be recovered, the lights don't turn on, they're completely dead.
Does anyone have a solution or should we give up and buy some more? |
|
#2
01-28-2013, 09:39 PM
|
|||||
|
|||||
|
Re: Jaguar "can't contact boot loader"
Quote:
Best, Ricky |
|
#3
01-28-2013, 10:11 PM
|
||||
|
||||
|
Re: Jaguar "can't contact boot loader"
Are you using a 2CAN or serial gateway?
|
|
#4
01-28-2013, 10:30 PM
|
|||
|
|||
|
Re: Jaguar "can't contact boot loader"
2CAN
|
|
#5
01-29-2013, 10:09 AM
|
||||
|
||||
|
Re: Jaguar "can't contact boot loader"
Have you tried setting the 2CAN's bitrate to 500 kbps? The bricked state that you are observing is most likely the Jag stuck in boot loader.
Read this thread. http://www.chiefdelphi.com/forums/sh...=2CAN+500+kbps |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
