legality of wheels on outside of frame

[JohnSchneider]

Originally Posted by ferrari77

this year our team decided to go with a custom sheet metal WCD drivetrain

the outsides are sheet metal C channels with the wheels on the outside

from the top it would look like this

------
0| |0
0| |0
0| |0
0| |0
------

The Frame Perimeter definition in R02 says it must comprise "fixed, non-articulated structural elements."

I have see many teams do a WCD style drive and have metal portrusions along their chassis that stick out past their wheels in order to mount their bumpers. as long as the portrusions support the bumpers every 8 inches does this comply with the rules?
we don't have enough space to mount the wheels on the inside of our drivetrain so if anyone can confirm that this is legal or provide suggestions of how to legally mount bumpers it would help a lot

if you want pictures I can upload some of the cad of our chassis

thanks

Yes that would be legal


you dont necessarily have to have protrusions between the wheels. 254 in 2012 had some supports that when up at a diagonal from the top of their frame and then had a perimeter.

There are several creative ways to mount bumpers on WCD. Just go to the media tab and look for pictures.

[thefro526]

Originally Posted by animenerdjohn

Yes that would be legal


you dont necessarily have to have protrusions between the wheels. 254 in 2012 had some supports that when up at a diagonal from the top of their frame and then had a perimeter.

There are several creative ways to mount bumpers on WCD. Just go to the media tab and look for pictures.

Here is a pretty good picture describing the 254-esqe method (picture is of 2791's drive).

http://www.chiefdelphi.com/media/photos/37170

[Tuba4]

I think this may be a Catch-22 though. What is the frame perimeter in this case? If the perimeter is defined by the wheels, then is it under the 112" limit? If the perimeter is defined by the frame itself, then would having the wheels be outside the frame be a rule violation? Don't know, just asking!!!