|
|
|
 If you're in Israel, it might be a long flight to the nearest Walmart - MrForbes [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| If you're in Israel, it might be a long flight to the nearest Walmart - MrForbes [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||||
|
||||||
|
Re: VEXPro Ball Shifter Shaft Malfunction
Please make sure to use loctite 609. We had a few shafts in early production that were not properly cleaned prior to bonding. This may be one of those shafts.
In any case, we will replace it if you can't fix it yourselves. |
|
#2
02-02-2013, 22:27
|
|||
|
|||
|
Re: VEXPro Ball Shifter Shaft Malfunction
We experienced the same thing today when testing our drive base on blocks. One shaft came out and the chains flew off....the other started coming out. Chains were in alignment. The back pair of chains were a little too tight, perhaps that's the reason.
We are thinking about machining a collar to grip the shaft to the shaft housing so our drivetrain will be worry free. |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
