pic: 3997 2013 Electronics

[Alan Anderson]

Originally Posted by dodar

I would just be wary because the breakers on the PD Board are setup so that red and black opposite of each other are on the same breaker and if it pops, 2 would go down instead of just one.

I don't understand what you're saying here.

The Power Distribution Board is intended to be wired so that the red/power and black/return terminals for each breaker-protected branch circuit are adjacent, not opposite. Regardless, all of the black terminals are connected directly to the (-) battery terminal, and the breaker only interrupts current to the red terminal.