Victor motor contorls flashing orange

[Tem1514 Mentor]

Originally Posted by Mark McLeod

The Calibration instructions are on page 2 of the Victor 888 User Manual

But are the motors still not running even though the Victors are going from flickering orange to off when you try?
Or is the robot moving, but you just have a flickering orange status light when it's supposed to be at rest?

Just a side note since we don't know if the software is working correctly, performing a calibration to the joystick may, I'll say that again may make the problem worse.

I would really try resetting the Victors back to the factory default and then see what happens assuming the Victors will respond to the default function as indicated in User manual.