Go to Post I don't like to tempt the gods of inspection on items like this. - MrRoboSteve [more]
Home
Go Back   Chief Delphi > Other > FIRST Tech Challenge
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
 
 
Thread Tools Rating: Thread Rating: 6 votes, 5.00 average. Display Modes
Prev Previous Post   Next Post Next
  #11   Spotlight this post!  
Unread 05-02-2013, 15:14
skatefriday skatefriday is offline
Registered User
no team
Team Role: Mentor
 
Join Date: Feb 2013
Rookie Year: 2011
Location: Los Angeles
Posts: 38
skatefriday is an unknown quantity at this point
Re: [FTC]: Using Anderson Connectors for wiring.

Quote:
Originally Posted by PhilBot View Post
It is 100% legal to replace the battery connector with the Anderson Power Pole connector.

See <03> n,o and s. This is very well stated here.
No need to ask the forum.

It was legal in 2011/12 and it is in 2012/13. We have done it both years.

It's also recommended that you build your own power wiring harness and use connectors to make it more modular.

We have also used the andderson connectors to make our motor connections more reliable. We solder short wires onto the motors and then add a connector.

The Anderson connectors are MUCH more reliable than any of the other FTC connectors becasue they incorporate a two-part contact. One part is a stainless steel leaf spring to provide contact pressure, the other part is the actual conductor contact. You can get two different contact, based on the wire size you are using. I recommend also purchasing the wire to go with the connectors. It's color coded zip wire that is very flexible and easy to use.
We switched to an Anderson Powerpole based bus late last year and it
has proved to be quite an improvement over daisy chained power.

Thank you for the rule clarification. I had read that rule earlier in the season,
but I was looking for a rule that would allow our team to use an Arduino
to control decorative lights. I therefore was not focusing on the battery
and I missed that.

Thank you for pointing it out. We are cutting our Molex connectors off
at our next meeting.
Reply With Quote
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 08:35.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi