pic: 3992 Drive Train

[Gregor]

Originally Posted by ksafin

What about putting a Mini-CIM in each gearbox for additional torque? Or RS-775's on CIM-U-Lators?

Thats not a bad idea, and probably the fastest switch, but switching to Toughbox Mini's would give you the best results.

[ksafin]

Originally Posted by Gregor

Thats not a bad idea, and probably the fastest switch, but switching to Toughbox Mini's would give you the best results.

We'll see what we can do.

We'll test with this and a heavy load on the chassis and see if the results are poor enough to warrant the switch.

If anything, I think we'll switch to toughbox Nanos. The mini has a front plate bigger than our actual plate so it'd be an odd fit.

[Gregor]

Originally Posted by ksafin

We'll see what we can do.

We'll test with this and a heavy load on the chassis and see if the results are poor enough to warrant the switch.

If anything, I think we'll switch to toughbox Nanos. The mini has a front plate bigger than our actual plate so it'd be an odd fit.

TB Nanos are also a good choice, I like them.