Full Court Shooter Testing Wave Robotics FRC2826

[Tyler Olds]

Some additional tests of our fabricated shooter (mounted to a platform). This time the shooter is positioned at the feeder station. Though the pyramid was not present in this test, we are able to shoot around the pyramid from this position.

Check our the video on YouTube here! Don't forget to "Like" us on Facebook!

The first has the camera on the shooter so it does vibrate a bit, but the other two segments are just above the shooter and have a lot less vibration.

Hope you like it!

[Akash Rastogi]

Dat Curve.


Stoked to see the final product, Tyler and crew!

[jblay]

I wonder how many teams are planning to plant on the other end of the field and do this. Really creates a perfect partner that will either score the frisbees from the HP or put them into the zone for their partners.

[BigJ]

Oh boy!

See you guys in Duluth and Milwaukee

[MrRiedemanJACC]

Can we have some details on the shooting mechanism? Straight vs curved? Pneumatic tires? Cim motor?

[Teamcodeorange]

Originally Posted by MrRiedemanJACC

Can we have some details on the shooting mechanism? Straight vs curved? Pneumatic tires? Cim motor?

I doubt they'll tell us that. Might as well ask though.

[EricLeifermann]

Ill tell you its 2 775 motors and banebots wheels. Curved or straight? You'll see soon.

[MrRiedemanJACC]

Thanks! Be careful of the 775 motors. We had shorting problems last year, as did many other teams. We are using dual 550's this year into a cimulator. Just to avoid the 775's.

Btw, great job!

[EricLeifermann]

Originally Posted by MrRiedemanJACC

Thanks! Be careful of the 775 motors. We had shorting problems last year, as did many other teams. We are using dual 550's this year into a cimulator. Just to avoid the 775's.

Btw, great job!

We've used the 775's several times and have had no issues. The trick is to test them before you put them on your robot.

[barn34]

very impressive, guys! looking forward to seeing the whole thing in action in Milwaukee.

hmmm....full court, accurate shooter paired with a versatile 30 point climber... something tells me that would potentially make for a strong backbone of a very formidable alliance

[TheCrayButton]

WOW! That is way better than ours. Nice job guys.

[cadandcookies]

Can I bet a curved/straight shooter? like, it comes around an elbow and into a linear-like shooter? I wouldn't put it past you guys.

[silverD]

Looking great! Can't wait to see it in action in Duluth.

[Justin Shelley]

Very nice shooter!!! I believe in matches without a defensive robot on the opponents team to block feeder station shooters that these robots will be extremely difficult to beat!! great job guys!!

[Lil' Lavery]

Originally Posted by EricLeifermann

We've used the 775's several times and have had no issues. The trick is to test them before you put them on your robot.

That's far from foolproof. We had two 775 motors develop a case short after being installed on our robot in 2011. Both were tested prior to being installed.