Code Not Deploying

[Greg McKaskle]

There was a bug in the RT runtime that kept LV from exiting out of deployed applications in order to start another. The LV 5.1 update works around this. The workaround until you install the update is to exit the dashboard, then deploy code, then launch the dashboard.

Greg McKaskle

[cdizzle]

Originally Posted by Greg McKaskle

There was a bug in the RT runtime that kept LV from exiting out of deployed applications in order to start another. The LV 5.1 update works around this. The workaround until you install the update is to exit the dashboard, then deploy code, then launch the dashboard.

Greg McKaskle

We tried exiting the dashboard and then running the code, but the cRIO still isn't responding.

[Greg McKaskle]

Still isn't responding means it is waiting for ...

Also, the RT bug I described would peg the CPU when it was waiting for the deployed code to exit.

The bug would occur when any SmartDashboard client was connected, I mention the dashboard because that is typically the only one teams run, but if you are running Smartdashboard, Table Viewer, RoboRealm, or other Smartdashboard clients exit those too. And better yet, install the LV5.1 update and the bug will go away.

Greg McKaskle

[cdizzle]

It worked after I re-imaged the cRIO, if that helps in any way.

[Greg McKaskle]

If imaging the cRIO involves formatting it, then the deployed app will be deleted. So it is the other, much longer, workaround.

Greg McKaskle

[cdizzle]

Ok, I'll try updating the LabView code, thanks for your help!