|
|
|
 I think Team 45 is cloning Andy. Anybody who has pitted next to them should agree that they are first class students running a first class team. - IKE [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| I think Team 45 is cloning Andy. Anybody who has pitted next to them should agree that they are first class students running a first class team. - IKE [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#10
11-02-2013, 14:06
|
|||
|
|||
|
Re: Losing power through DS.
We were told by another team that on the DS, there is a small LED next to the 2-pin connector that flashes. On two of our three Digital Sidecars, the LED doesn't light up. We haven't checked the third DS, however we were also informed that it MAY be something in the coding, although I don't see why.
If all else fails, in the previous years we've wired the light into the 12V terminal on the PD board. Could we splice the wires to the light and wires to the D-Link together and connect it to the same terminal? |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode