Vision Tracking with the AXIS M1013 Camera

[Greg McKaskle]

The attached image shows how to ignore the array and selector and hard-wire your camera lens angle. I didn't check the number BTW, so use the right angle in place of the 67. Note that the numbers used by the example are just a bit different than what the camera mfgr published. These were determined with a calibration routine.

Greg McKaskle

[AquaMorph]

Originally Posted by Greg McKaskle

The attached image shows how to ignore the array and selector and hard-wire your camera lens angle. I didn't check the number BTW, so use the right angle in place of the 67. Note that the numbers used by the example are just a bit different than what the camera mfgr published. These were determined with a calibration routine.

Greg McKaskle

Thanks that worked. I found the right number to be 62.