|
|
|
If I find a student on my team who came through FIRST having learned nothing more then he wanted to go to MIT, I'll give my self a pat on the back and start counting down to kickoff.
- Andy A. [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
Analog Breakout Board failures?
Dear CD,
I was wondering if anyone has experienced some failures with their analog breakout board? I am programming a potentiometer for the dashboard and have been successful with Analog Input 1 but Analog Input 2 and Analog Input 3 are not reading with very similar Labview software. I stopped testing last evening. My next step is to swap out the analog breakout board. I will report out results in a few days. 
|
|
#2
22-02-2013, 14:13
|
||||
|
||||
|
Re: Analog Breakout Board failures?
CD update,
I tested another analog breakout board and received the same behavior. The issue has been found to be a software issue that is in another thread. Case closed for now
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
