|
|
|
 It was the stupidest rule, but a rule is a rule, and everyone has to follow them. - RyanN [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| It was the stupidest rule, but a rule is a rule, and everyone has to follow them. - RyanN [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
No Camera Feed to Dashboard
Hi Everybody,
So I'm a complete beginner when it comes to programming the camera, so what I've done so far is I've configured the camera, followed the instructions from the "Acquiring Images from the AXIS Network Camera" for the camera code, and I'm just using the default code for the FRC cRIO robot project in LabView. I've plugged in the camera to the d-link, and all the lights are on, the light around the lens is green, but there's no feed to the dashboard. Am I doing anything wrong, or did I forget to do anything? 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode