|
Re: No apparent signal sent from PWM 10 [LabVIEW/also slightly electrical]
Quote:
Originally Posted by Kevin Sevcik
Try swapping your 37-pin ribbon cable with a new or different one. You might have a bad pin or wire on the cable.
|
When I first observed the problem we were using a ribbon cable like that which comes in the latest KoPs, I swapped it out for a serial cable like that which came in the older kits of parts to no avail.
EDIT: the digital module seems to be the culprit. It has been swapped-out and now works.
Last edited by eat4fun : 15-02-2013 at 23:43.
|
....FIRST helped me realize how much i enjoy engineering, so that i NEED to do well in my classes if i want to reach my goals. - the_short1 [more] 
Hybrid Mode
