MAR Pre-Ship Scrimmage

[Jim Giacchi]

Field is all setup! All we need are some robots. If you did not register, feel free to stop by anyway!
I'll post pictures of the field tomorrow.
Hope everyone is doing well with their robots.
Jim Giacchi

[Hallry]

Will there be photos/videos taken of the Scrimmage?

[simpsonboy77]

Originally Posted by Hallry

Will there be photos/videos taken of the Scrimmage?

Photos, definitely.

We will have a camera set up to take video. If I can't stream it I will take video and then overnight convert it and upload to youtube. I will do my best to stream it however. I meant to test this today but I never had time between crunch time and setting up a field.

You are more than welcome to come down to take your own video.

[Hallry]

Originally Posted by simpsonboy77

You are more than welcome to come down to take your own video.

A few of us will hopefully go down to test out our new scouting app (PISA - Now out on the Android Google Play Store), and take photos/videos as well

[CalTran]

Did this happen to be recorded? If yes, could someone direct me towards where I could find said records?

[Akash Rastogi]

Any teams attending the scrimmage tomorrow: Can you please check and see if you have a 10-32 pneumatic fitting for 1/4" tube? 2495 is in need of this due to a delayed McMaster order. If you do, please let Brandon_L or me know.

Thank you!

Anything this size: http://www.mcmaster.com/#52065K117

Doesn't have to be straight, can be right angle.

[Brandon_L]

Originally Posted by Akash Rastogi

Any teams attending the scrimmage tomorrow: Can you please check and see if you have a 10-32 pneumatic fitting for 1/4" tube? 2495 is in need of this due to a delayed McMaster order. If you do, please let Brandon_L or me know.

Thank you!

Anything this size: http://www.mcmaster.com/#52065K117

Doesn't have to be straight, can be right angle.

An adapter will also do, basically anything that lest us use a cylinder with a 10-32...fitting hole?

[omalleyj]

Originally Posted by Akash Rastogi

Any teams attending the scrimmage tomorrow: Can you please check and see if you have a 10-32 pneumatic fitting for 1/4" tube? 2495 is in need of this due to a delayed McMaster order. If you do, please let Brandon_L or me know.

Thank you!

Anything this size: http://www.mcmaster.com/#52065K117

Doesn't have to be straight, can be right angle.

Akash, do you still need one of these? Team 1279 has one, we will not be there until this afternoon (doing repairs). Can you wait until 2-3PM?

[Akash Rastogi]

Originally Posted by omalleyj

Akash, do you still need one of these? Team 1279 has one, we will not be there until this afternoon (doing repairs). Can you wait until 2-3PM?

Jim, if you could bring them to 2495 that'd be great! I can PM you Brandon's number as he is there with the team right now.

[simpsonboy77]

Originally Posted by CalTran

Did this happen to be recorded? If yes, could someone direct me towards where I could find said records?

I have raw footage on my desktop, I have not had time to parse it yet. Good news is streaming WILL work tomorrow. I hate web blocks and split VPN tunneling.

How would you like the video? If you want to bring an external hard drive (9GB) or flash drive I can copy it directly over for you. Otherwise I can upload it to youtube. I have never done this much so I'm not sure how to format it and such.

@Team 2495
I don't know pnuematic sizing and stuff, but I know we have a large supply of pnuematic stuff and fittings. Find me (buzz cut dude usually seen near a computer) and I'll try to get you what you need.

[CalTran]

Originally Posted by simpsonboy77

I have raw footage on my desktop, I have not had time to parse it yet. Good news is streaming WILL work tomorrow. I hate web blocks and split VPN tunneling.

How would you like the video? If you want to bring an external hard drive (9GB) or flash drive I can copy it directly over for you. Otherwise I can upload it to youtube. I have never done this much so I'm not sure how to format it and such.

@Team 2495
I don't know pnuematic sizing and stuff, but I know we have a large supply of pnuematic stuff and fittings. Find me (buzz cut dude usually seen near a computer) and I'll try to get you what you need.

Well...I'm in Kansas, so a hard drive won't exactly work...if you could upload it to YouTube, that would be appreciated. I don't have experience with uploading large amounts of video to YouTube, so I can't be of much service.

[simpsonboy77]

Originally Posted by CalTran

Well...I'm in Kansas, so a hard drive won't exactly work...

Forgive me, its been a long day heh.

I might try dropbox or something, I'm not sure. I'm kinda tired right now and I should be awake in 7 hours. I'm definitely going to run it through some compressor to drop its size down.

The more I think about it, dropbox sounds really good since anyone can grab it if they want. I should have a good chunk of space from the great space race.

[PayneTrain]

Originally Posted by simpsonboy77

I have raw footage on my desktop, I have not had time to parse it yet. Good news is streaming WILL work tomorrow. I hate web blocks and split VPN tunneling.

How would you like the video? If you want to bring an external hard drive (9GB) or flash drive I can copy it directly over for you. Otherwise I can upload it to youtube. I have never done this much so I'm not sure how to format it and such.

@Team 2495
I don't know pnuematic sizing and stuff, but I know we have a large supply of pnuematic stuff and fittings. Find me (buzz cut dude usually seen near a computer) and I'll try to get you what you need.

If you just wanted to send raw footage to him you could do something as simple as share a Google Drive/Dropox/etc. account and split the load of footage so you don't cap out maximum storage on the cloud service.

[Ryan Dognaux]

Originally Posted by simpsonboy77

Good news is streaming WILL work tomorrow. I hate web blocks and split VPN tunneling.

So is there a stream going for MAR right now? I haven't been able to find it yet if there is.

[Hallry]

Originally Posted by Ryan Dognaux

So is there a stream going for MAR right now? I haven't been able to find it yet if there is.

I don't know if there is or not, but where the website they said it would be streaming on (http://www.twitch.tv/avengerslayer) is blocked by our school computers =/

Originally Posted by PayneTrain

If you just wanted to send raw footage to him you could do something as simple as share a Google Drive/Dropox/etc. account and split the load of footage so you don't cap out maximum storage on the cloud service.

This would probably be much faster than uploading it to Youtube.