|
|
|
 and the only thing i see as a disadvantage to those long hours of hard work is a little less time to spend with my girlfriend - h1n1is4pigs [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| and the only thing i see as a disadvantage to those long hours of hard work is a little less time to spend with my girlfriend - h1n1is4pigs [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#35
17-02-2013, 12:56
|
|||
|
|||
|
Re: Problem Imaging 8-slot cRIO
Last year we noticed that the slots were changed to match up with the 4 slot cRIO. Also we found that the switches on/off was a bit misleading. So here is what worked on our 8 slot this year.
Switches from the outside edge of cRIO...Are they up/ or pushed down??? All these are the outside edge of each switch... SafeMode-down Console Out-down IP Reset-down No App-UP User1-down No FPGA-down Hope this helps some teams on 8-slot... 2625 Mentor... |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode