2 motors one jaguar

[2185Bilal]

Hey CD,
Our team has two motors that will be used for the conveyor belt and we were wondering that if it is possible to have the two motors hooked up to one jaguar, because they both are on the same speed.

Thanks

[ksafin]

Only if such is allowed for those motors. Check the Motors & Electrical sections of the rule manual.

This is allowed for certain motors, but not all.

[Bob Steele]

maybe
Table 4-4: Legal Power Regulating Device Use

Electrical Load


Jaguar, Victor, or Talon motor controller



M3-RS390-12

M3-RS395-12

M5-RS545-12

M5-RS555-12

M7-RS775-12

262100-3030

262100-3040

ARA Window motors

AE235100-0610


Up to 2 per controller



*Multiple low-load, pneumatic solenoid valves or lights may be connected to a single relay module. This would allow one (1) relay module to drive multiple pneumatic actions or multiple lights. No other electrical load can be connected to a relay module used in this manner.
R53

[ksafin]

Two of the following can be used per controller:
am PG motor

M3-RS390-12

M3-RS395-12

M5-RS545-12

M5-RS555-12

M7-RS775-12

262100-3030

262100-3040

ARA Window motors

AE235100-0610

am-2235

[jtdowney]

Originally Posted by Bob Steele

no

R52 does allow some motors to be hooked up with two motors controlled from one speed controller.

[CalTran]

Originally Posted by Bob Steele

no

No what? That you can't hook up two motors to a Jaguar, contrary to what R52 states? As long as the OP is using a fairly low draw motor, it would be alright. As stated before on these forums, spreading bad information is much much worse than having no answer.

[Bob Steele]

Originally Posted by jtdowney

R52 does allow some motors to be hooked up with two motors controlled from one speed controller.

you are right I noted the motors above... after an edit
I hit the key too quickly... you guys are fast

[ksafin]

Originally Posted by Bob Steele

you are right I noted the motors above... after an edit
I hit the key too quickly... you guys are fast

You should double check before posting anyway.

[Omar]

Originally Posted by 2185Bilal

is possible to have the two motors hooked up to one jaguar

Rule R52 Table 4-4

[Bob Steele]

Originally Posted by ksafin

You should double check before posting anyway.

Thanks for the advice.
I corrected it within 5 minutes of hitting the enter key by mistake...
sorry to have bothered you ....

[Bob Steele]

According to Table 4.4
in R 52
The am-9012 cannot be connected two to a motor controller

Please Read R52 in the manual