cRIO blink codes?

[Mark McLeod]

Look in
cRIO FRC II: CompactRIO cRIO-9075/9076 Operating Instructions and Specifications
cRIO FRC I: CompactRIO cRIO-9072/3/4 Operating Instructions and Specifications
Number of Flashes Every Few Seconds Indication

• 1 = The chassis is unconfigured.
• 2 = The chassis has detected an error in its software. This usually occurs when an attempt to upgrade the software is interrupted. Reinstall software on the chassis.
• 3 = The chassis is in safe mode, or there is no software installed on the chassis.
• 4 = The software has crashed twice without rebooting or cycling power between crashes. This usually occurs when the chassis runs out of memory.
• Continuously flashing = the chassis has detected an unrecoverable error.
• Continuously flashing or solid = the device may be configured for DHCP but unable to get an IP address because we use static addresses in FRC.

[y-aji]

Thank you, sir. I'll take a look at that in the morning.