|
|
|
 Overpowered? You only took out half the building... Knock the rest down then get back to me. - sodizzle [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| Overpowered? You only took out half the building... Knock the rest down then get back to me. - sodizzle [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Motors won't initialize
Our team is trying to use 6 jaguars but they don't work when initializing more than 4 at the Begin.vi, with 4 or less it Works. We already switched jaguars, and pwm outputs. Does anyone know why this might be happening?
|
|
#2
18-02-2013, 13:14
|
|||||
|
|||||
|
Re: Motors won't initialize
Do you have 12V power wired to your digital sidecar? Are the 6V and Bat LEDs on the sidecar bright green? The sidecar will barely work without 12V power, but too many PWMs connected to it and running will eventually make it fail without 12V powering it.
|
|
#3
18-02-2013, 13:15
|
|||||
|
|||||
|
Re: Motors won't initialize
12v power to the Digital Sidecar?
All three power status lights bright green?
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Thanks Mark and Kevin 
Linear Mode
