Corner bumpers?

[Redo91]

According to your drawing, you are interpreting the 8 inch length of bumper include the overhang into the corners. That overhang is NOT included in the 8 inches of bumper. You must have a minimum of 8 inches of bumper on either side of the exterior corners of your frame perimeter (as is shown in the image you took from the manual).

[Tao]

Originally Posted by Redo91

According to your drawing, you are interpreting the 8 inch length of bumper include the overhang into the corners. That overhang is NOT included in the 8 inches of bumper. You must have a minimum of 8 inches of bumper on either side of the exterior corners of your frame perimeter (as is shown in the image you took from the manual).

Ah yes, I failed to get that detailed when I drew up the diagram. Thanks for pointing that out as a reminder.

To all: Thanks for the response. I've never seen that bumper formation before so thank you for clearing it up.

[matthewdenny]

We did this last year with out issue.

[DonRotolo]

Originally Posted by matthewdenny

We did this last year with out issue.

...and last year's rules are relevant to this year how?