Quote:
Originally Posted by Kevin Sevcik
Make sure your servo is working period first. Make yourself a MoveStick method, and ServoWithStick command to drive the servo with a Joystick. Then set that as the default command for the subsystem and check to make sure you can even move it to begin with. If it's not moving with that basic of code, you know your problem is electrical or really basic programming level.
|
The servo is definitely working. I'm 99% positive the problem is my programming.
When the servo is plugged in and the robot is enabled, there's no reaction. If I switch the way the servo is plugged into the PWM it will lock into a position and attempt to maintain that position. It still does not react to my button pushes though.
"there are two types of underprivileged teams; the ones who whine about being underprivileged and the ones that work to become privileged". - Undertones [more] 
18-02-2013, 14:42
Threaded Mode