NI 9472 Module No Lights Please Help

[C.I.S.]

Here's our code in attachments
Photo.JPG --- Begin VI
Photo(2).JPG --- Teleop VI
Photo(3).jpg --- Finish VI

We followed a LabVIEW picture for coding a Double Solenoid. We believe now that our problem may be that we coded for a Double Solenoid when we actually have a Single Solenoid but we didnt know if that would make a difference on whether or not the crio lights would light up.

[Mark McLeod]

Originally Posted by C.I.S.

We followed a LabVIEW picture for coding a Double Solenoid. We believe now that our problem may be that we coded for a Double Solenoid when we actually have a Single Solenoid but we didnt know if that would make a difference on whether or not the crio lights would light up.

You'll need to code for a single solenoid for the code to work properly.
Something like this:


Check your solenoid too for 12v vs 24v and make sure the voltage matches the power you've wired into your Solenoid Breakout.

[C.I.S.]

Yes! Thank you. We coded for the single solenoid and the lights lit up via the joystick buttons.