Camera not displaying on FRC dashboard

[josh.pruim]

Dunno if the code can use the cam (Never tried, and probably won't need to because we have no autotargeting) and I have anonymous access enabled. I'm worried, because the camera is crucial to proper operation.

[Mark McLeod]

If your camera bandwidth is to high, i.e., using all the maximum defaults, then you won't get a picture on the Dashboard, but it will report bandwidth.

You must get the video stream bandwidth down under, at most, 5Mb/s.
You do this by clicking on the Dashboard camera controls and:

• lower fps
• raise compression
• lower resolution

The Dashboard allows you to play with mixing the settings and being able to see the results immediately.

http://www.chiefdelphi.com/forums/at...1&d=1360330560