assembly not parallel to ground plane

My first instinct was inflatable clowns and 5 of them beating on the robots at all times, but then I thought, thats probably not right. - Dan Richardson [more]

		Chief Delphi > Technical > CAD
assembly not parallel to ground plane

Thread Tools

Rate Thread

Display Modes

21-02-2013, 16:29

Shane1302

Registered User

FRC #1302

Join Date: Feb 2013

Rookie Year: 2010

Location: New Jersey

Posts: 8

Shane1302 is an unknown quantity at this point

Re: assembly not parallel to ground plane

I sent you the assembly. But i did fix the problem a few seconds ago. i rotated the entire assembly, then when into the manage menu and ran "rebuild all". im not sure if its the right way to do it but it worked.

__________________
1302
I have 99 problems, centering a piece in a 4 jaw independent chuck aint one of em

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -5. The time now is 22:17.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.