|
|
|
 The biggest fallacy in FIRST is the belief we are just a bunch of different teams. We are ONE BIG TEAM with a lot of sub teams for the purpose of competition. - Al Skierkiewicz [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: Dlink troubleshooting
For the time being, we found a store that has revB in stock and we will buy it from there. Thank you for responding, we'll take our FIRST issued router and ask the staff at Palmetto to take a look at it.
|
|
#2
22-02-2013, 19:03
|
|||||
|
|||||
|
Re: Dlink troubleshooting
Have you tried to log into the D-Link administration web interface? You might find it's something as simple as having to reload the firmware.
|
|
#3
22-02-2013, 20:08
|
||||
|
||||
|
Re: Dlink troubleshooting
i did that. I loaded the latest firmware from Dlink's website, but to no avail. I still got the red power light of death.
|
|
#4
22-02-2013, 21:53
|
||||
|
||||
|
Re: Dlink troubleshooting
Sounds bad, have you tried a 30-30-30 reset? I actually soft bricked one of my personal linksys WRT54G and WRT310N routers in the past. My issues was due to loss of power during a firmware upgrade (not to mention a bad firmware in the first place). If you haven't tried it out yet and are desperate the following link my help you out. http://www.dd-wrt.ca/wiki/index.php/...et_or_30/30/30
Just a thought, this could be a bad idea if FIRST had loaded in a custom firmware, but I'm doubting that.  Last edited by suj : 22-02-2013 at 21:58.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
