|
|
|
 I hope we as a team can learn the value of doing less but doing it incredibly well. - Rob Stehlik [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| I hope we as a team can learn the value of doing less but doing it incredibly well. - Rob Stehlik [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#8
23-02-2013, 03:41
|
||||
|
||||
|
Re: AM Compressor versus Thomas Compressor
I found the specifications for the Thomas compressor here http://www.gd-thomas.com/product.aspx?id=12084&tp=p .
To summarize Flow Viair 1.03 CFM @ 0psi Thomas .80 CFM @ 0psi Max continous pressure Viair 120psi Thomas 100.1psi Duty cycle Viair 9% Thomas Not rated Max on time Viair >3min 3sec Thomas Not rated Weight Viair 2.4lbs Thomas 4.4lbs Outlets Viair 1 Thomas 2 Current draw Viair 10a Thomas 10.5a Check valve included ? Viair Yes Thomas No Yes the external head temp of the Viair will get higher than the Thomas due to its lower thermal mass and the fact that it has more cooling fins to pull the heat from the compression chamber but that is a good thing since it likely means lower internal temps. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode