|
Re: Bumper Number
R31
Team numbers must be displayed on the BUMPERS and meet the following criteria:
A. consist of numerals at least 4 in. high, at least ½ in. in stroke width, and be either white in color or outlined in
white
B. may not wrap around a corner of the FRAME PERIMETER
C. be positioned around the ROBOT such that an observer walking around the perimeter of the ROBOT can
unambiguously tell the Team’s number from any point of view.
So I guess multiple numbers are OK if they meet the part about "unambiguously", to be determined by your inspector.
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
|
I believe everyone should give a modicum of repsect to each person they meet for the first time. After that it is up to them as to whether to give you a reason to increase that respect or detract from it. - Al Skierkiewicz [more] 
24-02-2013, 15:34
Threaded Mode