|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||||
|
|||||
|
Box positions
Searched, didn't find any threads relating, so here it is:
Do boxes have to be completely in the scoring zone when the human players are setting up in their ten second time frame, or can they be placed with only a little bit of the box touching the scoring zone? Last edited by GateRunner : 25-01-2003 at 10:34. |
|
#2
|
|||||
|
|||||
|
http://jive.ilearning.com/thread.jsp...56 d616e#1994
Based on that, i would say anything that is considered "in" based on the rules and is rightsside up would count in the human player mode |
|
#3
|
||||
|
||||
|
they are definately in if any part of them is in, be it half, a corner, any part of the box touching the blue/red rug counts as in
|
|
#4
|
||||
|
||||
|
Re: Box positions
Quote:
|
|
#5
|
|||||
|
|||||
|
i think first misunderstood the question when they asked about the tape...
what i got from first's answer is they thought the person meant the arc of tape, not the tape to the middle zone. someone should probably repost and ask about that... (*cough*me*cough*) *jeremy |
|
#6
|
|||||
|
|||||
|
I believe that as long as ANY part of your box is in the zone and they are upside down then you are ok....I might be wrong
|
|
#7
|
|||
|
|||
|
the boxes have to be right-side up- I know that as a matter of fact.. I also believe the whole box has to be in the zone- I'll check the rules
here it is- boxes have to be in the zone http://jive.ilearning.com/thread.jsp...8756d61 6e#71 Main Entry: 1with·in Pronunciation: wi-'[th]in, -'thin Function: adverb 1 : in or into the interior : INSIDE 2 : in one's inner thought, disposition, or character : INWARDLY Last edited by OneAngryDaisy : 25-01-2003 at 21:01. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| box grabbing | matt111 | 3D Animation and Competition | 3 | 27-01-2003 23:08 |
| project box | archiver | 2000 | 2 | 23-06-2002 23:01 |
| alliance positions | archiver | 2000 | 2 | 23-06-2002 22:34 |
| Gray box limitations | Tim Skloss | Technical Discussion | 1 | 23-01-2002 07:38 |
| Modular Control box assembly | Andrew Wyatt | Technical Discussion | 4 | 29-11-2001 15:44 |