Quick help for a gear changing pneumatics system.

[Jaxom]

Originally Posted by Kevin Sevcik

You're allowed to leave the compressor, Spike, pressure switch, and relief valve off your robot to save weight.

Can't leave off the relief valve; see R86:
The relief valve must be attached directly to the compressor or attached by legal fittings connected to the compressor output port. If using an off-board compressor, an additional relief valve must be included in the high pressure side of the pneumatic circuit on the ROBOT. If you want to only store 60 psi (why?) you don't need one.

And don't forget that if you move the compressor off-robot you have to have a manual vent valve both on & off the robot.