camera Axis M1011 problem

[Mark McLeod]

See if the Dashboard is displaying a Mbps value, just not a picture.

The default camera settings are too bandwidth intensive and will result in a blank screen on the Dashboard.
The settings need to be changed on the Dashboard and are interactive, so once the settings are reduced below about 5Mb/s an image should appear.

To start with, try settings of:
- 320 x 240
- 10 fps
- 50% compression

See this example of the camera controls:
http://www.chiefdelphi.com/forums/at...1&d=1360330560